E N G
FLUIDS ALLOWED / NOT ALLOWED
G
ALLOWED:
FRESH WATER, SEA WATER
DIESEL FUEL: minimum flashpoint (PM) 38 °C
Max. fluid temperature: 40 °C
NOT ALLOWED:
- PETROL (GASOLINE)
- FLAMMABLE LIQUIDS with PM < 38 °C
- LIQUIDS WITH VISCOSITY > 20 cSt
- FOODSTUFF LIQUIDS
- CORROSIVE CHEMICAL PRODUCTS
- SOLVENTS
TRANSPORTATION AND HANDLING
H
Due to limited weight and dimensions the pump does not require the use of any special
handling or lifting equipment. When handling manually, normal personal protective gear
should be worn (safety shoes with toe piece, etc.)
The pump is carefully packed prior to shipment. Upon receiving, the pump packaging
should be inspected for damages and the pump stored in a dry area.
I
It is recommended that the use of the pump be according to normative safety standards
and also as per the precautions listed below.
I-1
The user is invited to effect a proper waste separation, in order to facilitate the recycling of
the materials of which the packing is composed; disposal like CER 15.01.01/02
I-2
Check that there has been no damage to the pump during transportation or storage. Both
inlet and outlet ports should be carefully cleaned removing possible dust or residual
packaging material. Verify that the available electrical power supply corresponds to the
pump specification requirements.
I-3
The pump can be mounted in any position. Fix the pump utilizing suitable screws
corresponding to the antivibration mounts supplied with the pump.
INSTALLATION
PACKAGING ENVIRONMENTAL DISPOSAL
PRELIMINARY CHECKS
POSITIONING OF THE PUMP
©
RELATED DANGERS
- FIRE EXPLOSION
- FIRE EXPLOSION
- MOTOR OVERHEATING
- FOODSTUFF LIQUID CONTAMINATION
- PUMP CORROSION -
- INJURY TO PERSONNEL
- FIRE EXPLOSION
- DAMAGE TO SEALS
8
S.p.A.