Electrolux EHL9530FOK Notice D'utilisation page 12

12 www.electrolux.com
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the time: set the cooking
zone with
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking
zone deactivates.
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer.
indicator of the cooking zone starts to
flash slowly the time counts up. The
display switches between
counted time (minutes).
To see how long the cooking zone
operates: set the cooking zone with
The indicator of the cooking zone starts
to flash quickly. The display shows how
long the zone operates.
To deactivate the function: set the
cooking zone with
. The indicator of
. Touch or .
and touch
.
comes on. When the
and
and touch
. The indicator of the cooking zone
goes out.
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and
the cooking zones do not operate. The
of
heat setting display shows
To activate the function: touch
Touch
time. When the time comes to an end,
the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect
on the operation of the
cooking zones.
5.8 STOP+GO
. The
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
5.9 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
of
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
.
When you deactivate the
hob, you also deactivate this
function.
or
or of the timer to set the
.
.
.
.
.
.
.