Denon Professional DN-300R MKII Guide D'utilisation page 10

Audio File Playback Order
When playing audio files stored within multiple folders, the playback
order of each folder is automatically set when the unit reads the
media. The files in each folder will play in the same order in which
they were added to the media. (This order may appear differently on
your computer and/or in your software than it does on the unit.)
The image here illustrates how folders are structured into levels on
your media.
The folder structure also determines the playback order: For audio
files on a USB device or SD card, files in the root level will play,
then files in the first folder of the first level, then files in the second
folder of the second level, and so on.
Troubleshooting
If you encounter a problem, try doing these things first:
• Make sure all cables and other connected devices are properly and securely connected.
• Make sure you are using DN-300R MKII as described in this user guide.
• Make sure your other devices or media are working properly.
• If you believe DN-300R MKII is not working properly, check the following table for your
problem and solution.
Problem:
Power does not turn
on.
DN-300R MKII does
not produce any
sound, or the sound
is distorted.
10
Solution:
Make sure DN-300R MKII's power input is
properly connected to a power outlet using the
included power cable.
Make sure all cable and device connections
are secure and correct.
Make sure none of the cables are damaged.
Make sure the settings on your device,
loudspeaker, mixer, etc. are correct.
Level 1 (root) Level 2
Folder 1 File 7
File 1
File 8
File 2 File 9
File 3 File 10
Folder 2
File 11
File 12
File 4
File 5
File 13
File 6
File 14
Please see:
Setup
Setup