Clean Air Optima CA-607W Mode D'emploi page 14

Troubleshooting
The following is a troubling shooting guide to help you solve any issues that you may have
using the Clean Air Optima
Problem
No mist diffused.
The mist has a strange
odour.
The volume of spray
mist is too low.
Device is noisy.
Spray mist is coming
out of the area around
the mist nozzle.
14
®
Ultrasonic Humidifier CA-607W.
Possible Cause
Power plug not plugged in.
ON / OFF button not activated.
Empty water tank.
Not enough water in tank.
A new device.
It either has dirty water or the
water has been stagnant too
long.
Too much mineral scale in
the water basin and on the
transducer.
Water is too dirty or water was
kept too long in the tank.
Water tank not positioned
correctly.
Not enough water in the water
tank.
Device is on an unstable
surface.
There are gaps between the
housing around the nozzle and
the top of the water tank.
Solution
Plug in device.
Press ON / OFF button.
Fill tank with water.
Refill tank with water.
Remove the water tank, unscrew
the lid and let it air out in a cool
area for 12 hours.
Clean the water tank and refill
with clean water.
Clean transducer.
Clean the water tank and refill
with clean water.
Correctly position water tank on
the base.
Refill water in the water tank.
Place device on solid and even
ground.
Remove the nozzle from the top
of the water tank and clean with a
damp cloth. Reattach to the water
tank.