Introduction - English; Dc Input - abi LinearMaster Compact Manuel D'utilisation

LinearMaster Compact Linear IC Tester

1. introduction - english

Thank you for purchasing the ABI
LinearMaster Compact Professional
Linear IC Tester.
The basic function of the LinearMaster
Compact Professional is to test a
linear IC for correct logical functioning
as described in the manufacturer's IC
data sheets. The LinearMaster
Compact applies the necessary analogue signals to the inputs of the IC,
monitoring the outputs at each stage and comparing them with the
expected voltages. Any discrepancy results in a FAIL indication and the
faulty pins are shown on the integral display. Additional facilities are also
provided, amongst them test loops that can be used for goods inwards
inspection, detecting intermittent faults or simply providing a rapid
method of exercising any IC for demonstration or educational purposes.
Since the LinearMaster Compact contains an extensive IC library, it is
not necessary to program the unit yourself other than to key in the IC
number. It is also capable of identifying an unknown IC using the
SEARCH mode - this is a feature that many users will find extremely
valuable.
The LinearMaster Compact Professional is provided with an RS-232
interface enabling it to be connected to a companion software package
called CompactLink running on a PC. CompactLink allows test
programmes for ICs not included in the internal library to be developed
and downloaded into the LinearMaster Compact memory to enhance the
library according to your wishes.

2. DC input

The LinearMaster Compact is powered by four AA batteries or by the
use of the battery eliminator input at the rear of the case. To insert the
batteries, turn the unit upside down and remove the battery cover by
removing the two cross head screws holding it in place. The batteries
must be inserted in the correct orientation, as indicated by the drawing
within the battery compartment. Incorrect insertion of batteries will not
allow the unit to operate. Replace the battery cover and insert the
screws. If the battery voltage falls too low, a low battery warning symbol
Copyright © 1993-2011 ABI Electronics Limited
Page 1