Specifications - abi LinearMaster Compact Manuel D'utilisation

connect the serial cable and follow the CompactLink manual instructions
to connect to the LinearMaster Compact Professional.
For comprehensive instructions on using CompactLink please refer to
the manual and built-in help supplied with the software.
Note that in CompactLink mode, including waiting for a connection, the
normal power down timeout is disabled and the unit will remain on for
ever. We recommend using a battery eliminator when using
CompactLink mode to develop test programmes.
14.

specifications

SPECIFICATIONS
Batteries:
DC input:
Power consumption:
Test parameters:
RS-232 settings
Dimensions:
Library ICs:
LinearMaster Compact Linear IC Tester
4 X AA size
6V, 850mA max, centre positive, regulated.
Power off
Standby
Testing
Supply voltage
Op amp gains
Stimulus
Sense
38400 baud, 8 data bits, 1 stop bit, no parity
200mm X 100mm X 55mm approx.
Op
references, switches, miscellaneous
Copyright © 1993-2011 ABI Electronics Limited
Page 9
10µA max
30mA max
IC dependent
2V to 10V IC dependant
open loop, 1,2,11,46
0 - 10V, 8 bits, 330R source
0 to 10.5V, 12 bit, >1M load
amps, comparators, optos, regulators,