Bosch 9001164799 Guide D'utilisation page 19

Auto Power Off
To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.
To change the setting:
1
Press the [On/Off] button.
2
Hold down the "A" button (see page 15) and press [Start/Resume] until the display indicates
"H:0x" (x can be any number).
3
Release both buttons.
4
Press the "A" button until the display indicates "P:0x".
5
Press the "C" button until the display corresponds with your requirements.
P:00 = dishwasher does not turn off automatically
P:01 = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)
6
Press [Start/Resume] to save the setting.
Child Lock
1
Start the desired cycle.
2
Hold down the button that says "Child Lock" underneath it for approximately 3 seconds until the
display reads "CL ".
3
The "CL " will be indicated now if any button is pressed and the program will not be reset.
To deactivate the child lock, hold down the "Child Lock" button for approximately 3 seconds until the
display no longer reads "CL".
Aquastop® Leak Protection
Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works
with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps
out water to avoid contact with the floor. It works 24/7 and can turn itself on.
17