Control Panel - AEG SKS81040F0 Notice D'utilisation

ble regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, espe-
cially at the rear near the heat ex-

2. CONTROL PANEL

Display
1
Temperature warmer button
2
Temperature colder button
3
OK button
4
Mode button
5
ON/OFF button
6
It is possible to change predefined
sound of buttons to a loudly one by
pressing together Mode button and
Temperature colder button for some
seconds. Change is reversible.
2.1 Display
1
Timer function
1
COOLMATIC function
2
Minute Minder function
3
Child Lock function
4
Alarm indicator
5
Temperature indicator
6
FROSTMATIC function
7
2.2 Switching on
To switch on the appliance do these
steps:
1. Connect the mains plug to the pow-
er socket.
6
7
FROST
COOL
MATIC
MATIC
2 3 4 5
changer. The materials used on
this appliance marked by the
symbol
1
5 4 3
2. Press the appliance ON/OFF button
if the display is off.
3. The alarm buzzer could operate af-
ter few seconds.
To reset the alarm refer to "High
temperature alarm".
4. If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "WHAT TO DO IF..."
paragraph.
5. The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".
2.3 Switching off
To switch off the appliance do these
steps:
1. Press the appliance ON/OFF button
6
for 5 seconds.
2. The display switches off.
3. To disconnect the appliance from
the power disconnect the mains
plug from the power socket.
2.4 Temperature regulation
The set temperature of the fridge may
be adjusted by pressing the temperature
button.
Set default temperature: +5°C for the
fridge.
The temperature indicator shows the set
temperature.
The set temperature will be reached
within 24 hours.
ENGLISH
are recyclable.
2
21