Notice For The Blue/White Lead; Parts Supplied - Pioneer AVIC-N5 Manuel D'installation

Connecting the System
— Turn off the ignition switch (ACC OFF)
! If [Antenna Control] mode is set to
[Power], the vehicle's antenna can be
stowed or turned off only when the ignition
switch is turned off (ACC OFF).
! Do not connect this lead to the system con-
trol terminal of external power amps.
! Be sure not to use this lead as the power
supply lead for the auto-antenna or anten-
na booster. Such connection could cause
excessive current drain and malfunction.

Notice for the blue/white lead

! When the ignition switch is turned on (ACC
ON), a control signal is output through the
blue/white lead. Connect to an external
power amp's system remote control term-
inal (max. 300 mA 12 V DC). The control sig-
nal is output through the blue/white lead,
even if the audio source is switched off.
! Do not connect this lead to the auto-anten-
na relay control terminal or the antenna
booster power control terminal.
! Be sure not to use this lead as the power
supply lead for the external power amps.
Such connection could cause excessive
current drain and malfunction.

Parts supplied

The display unit Connector
The hide-away unit
Extension lead
(for reverse signal)
30-pin cable
Extension antenna
cable
Section
03
Power cord
Extension lead
(for speed signal)
GPS antenna
RCA connector
7
En