Pioneer AVIC-N5 Manuel D'installation page 15

Connecting the System
30 cm (12 in.)
Power cord
WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS
DESIGNED TO DETECT PARKED STATUS AND MUST BE
CONNECTED TO THE POWER SUPPLY SIDE OF THE
PARKING BRAKE SWITCH. IMPROPER CONNECTION OR
USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW
AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
Connection method
Clamp the lead.
5 m (16 ft. 5 in.)
Yellow/Black (GUIDE ON)
The display unit
When combining this navigation system with the other
Pioneer audio unit for the vehicle, if the vehicle stereo has
yellow/black leads, connect them to those leads. In this way,
the vehicle stereo is automatically muted to reduce the vehicle
stereo volume when;
— the guidance audio is output.
— the mobile phone is used via Bluetooth adapter.
Light green (PARKING BRAKE)
Used to detect the ON/OFF status of the parking brake. This lead must be
connected to the power supply side of the parking brake switch.
If this connection is made incorrectly or omitted, certain functions
of your navigation system will be unusable.
Clamp firmly with
needle-nosed
pliers.
Fuse resistor
Extension lead
(for reverse signal)
Check the position of your vehicle's
backup light (the one that lights up
when the shift lever is in reverse [R])
and find the backup light lead in the
trunk.
Power supply side
Ground side
Parking brake switch
backup light lead
Section
03
15
En