Product Use; Maintenance - Greencut GSM210L Manuel D'utilisation

PRODUCT USE

SWITCH BUTTON AND SAFETY BUTTON
Before inserting the battery into the chain saw, make sure that the switch button and the safety button are released.
To prevent accidental starting, the chainsaw has a safety button.
After inserting the battery, press the switch button and the safety button together to turn the saw on and off. When
they are pressed together, the chainsaw will start and the led light on the side of the saw will come on.
BATTERY
When the product arrives, the battery may not be fully charged. We recommend charging it and then using the
product. To install it, it must be fitted to the lower part of the drill and to remove it, press the red button on the battery
to be able to extract it correctly.
CHARGE
To charge the battery, the charger must be connected to the mains socket and the mains socket must be connected
to the battery via the cable.
the cable. When you connect the charger to the battery, the red indicator light on the charger will come on, this
means that it is charging.
When the red light turns off it means that the battery is full.
The battery contains a key to display its status by illuminating three green LED lights. When
When the battery is discharged the indicator light will not light up.

MAINTENANCE

Good maintenance will extend the life of the machine. Prolonged or constant use may require more intensive
maintenance for the machine to continue to function properly.
ATTENTION: Make sure the engine is completely shut down before performing any maintenance
or repair. This will eliminate any potential risk.
• Utilice un trapo húmedo con agua y un poco de jabón suave para limpiar la herramienta. Nunca permita que se
• introduzcan líquidos en el interior.
• No permita que el polvo y suciedad entren en las salidas de ventilación.
• No utilice sustancias disolventes que puedean dañar las piezas de plástico.
• No es necesario engrasar la cadena.
Chain tension
Sharpening the chain
For damaged parts
For loose bolts
Sword
Complete saw
DAILY CHECK
Before every use and frequently
Before each use, visual check
Before every use
Before every use
INSPECT AND CLEAN
Before every use
After each use
51
EN