Setup" Setting - Sony Trinitron WEGA KC-AW212 Mode D'emploi

x "Setup" setting
Press WEGA GATE and select "Settings".
Press V or v to select the "Setup" icon ( ),
then press
"Language"
"Picture Rotation"
(KV-AW212M81 only)
"Video Label"
"Color System"
"Wake Up Timer
Beep"
(KV-AW212M83/
AW212M81 only)
"Factory Settings"
• To ensure the beeping sound can be heard, you must set an appropriate volume
level on your TV and make sure the TV is not in mute condition.
• To stop the beeping sound, press any buttons on the remote control or front panel.
• If no button is pressed for three minutes, the beeping sound will automatically go
off.
.
Change the menu language.
Press V or v to select either "English" or "
press .
Adjust the picture position when it is not aligned with the TV
screen.
Press B or b to adjust the picture position, then press
Label the connected equipment.
(1) Select "Video Input" and press
input you want to label, then press
(2) Select "Label" and press
the label options: "Video 1"/"Video 2"/"DVD", "VCR",
"SAT", "Game" or "Edit"*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press
Select the color system.
Press V or v to select either "Auto", "PAL", "SECAM",
"NTSC3.58" or "NTSC4.43", then press
"Auto".
Allow your TV to emit beeping sound when TV switches on
automatically using wake up timer.
Press V or v to select "On", then press
To cancel, select "Off", then press
Reset your TV to factory settings.
Press and press V or v to select "Yes". Then press
Your TV will go blank for a few seconds, then the "Initial Setup"
menu will appear.
To cancel, select "No", then press
Setup
Language:
Picture Rotation
Video Label
Color System:
Wake Up Timer Beep:
Factory Settings
Select
Confirm
" (Arabic), then
. Press V or v to select the
.
, then press V or v to select
. Normally, set this to
.
.
.
English
Auto
On
End
.
.
.
GB
15