AEG BSS 4803 BT Mode D'emploi page 33

Description of the USB controls
(1/2)
You can pause and continue music playback. Press again to
continue playback.
(5/4)
Press 1 x = Skip to the previous song.
Press 2 x = Skip to the song before the previous song.
NOTE:
The number of the current title is displayed briefly.
(5/4)
Press to skip to the next song and the following songs.
NOTE:
The number of the current title is displayed briefly.
RPT/LED (3)
Press briefly:
Activates the Repeat function.
• All titles are constantly repeated by default.
The " " symbol is displayed.
• Press the button to repeat only the current title.
The " " symbol flashes.
Keep pressed: Turns the indicator lamp (7) on and/or off.
RAN (8)
Activates random playback. All titles are played back in a
random sequence. To deactivate the function again, press
the RPT/LED button 2x.
NOTE:
The activated function cannot be displayed for technical
reasons.
/ (7)
If folders exist, the next or previous folder is selected. Play-
back is stopped and the " " symbol appears. The selected
folder (e.g. 04) and the number of the title with which play-
back begins are displayed (e.g. 0016).
OK (4)
Playback starts in the previously selected folder.
Cleaning
• Before cleaning disconnect from mains power supply.
• Clean the device with a soft damp cloth without deter-
gents.
• Do not submerge the device in water.
Troubleshooting
Fault Cause
Unit cannot be Unit crashes
operated. and "hangs".
No audio signal Speaker is not
via the Bluetooth paired to the
connection audio source.
Volume too
low
Speaker cannot Pairing does
be connected not work
Audio source
is switched off
Bluetooth is
switched off
at the audio
source.
Bluetooth
version is not
supported.
Music tracks are Random
played back via playback is
USB in the wrong activated.
sequence.
Technical Specifications
Model: ...........................................................................BSS 4803 BT
Power supply: ..............................................................230 V~ 50 Hz
Power Consumption:................................................................50 W
Protection class: ................................................................................II
Net weight: ................................................................approx. 2.5 kg
Bluetooth
Bluetooth support: ........................................................V2.0 + EDR
Range: ..................................................................approx. 15 metres
Transmission frequency: ......................................................2.4 GHz
Protocols: ............................................................................A2DP 1.2
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
English
33
Solution
Disconnect from the
mains for around
5 seconds. Then switch
the unit on again.
Check whether a connec-
tion exists. If necessary,
pair the speaker again to
the audio source.
Increase the volume on
the speaker
Increase the volume on
the audio source.
Check whether the audio
source supports the
A2DP protocol.
Switch on the audio
source
Switch on the Bluetooth
function in the audio
source.
Use a different playback
unit.
Press the RPT/LED button
2x (3).