8 adapters
2 Screw valve
3 4 inch Air Hose
USING THE COMPACT TIRE INFLATOR
The compact tire inflator comes equipped to add air to car tires. It also includes air needle adapters for
adding air to bicycle tires, sports balls, etc.
1. Connect the connector (6) of then compact tire inflator to the 12 V connector (7) of then booster MPB-
8800.
2. Connect the appropriate air needle adapter (8) to the compact tire inflator if needed.
3. Connect the screw valve (2) of the compact tire inflator to item to inflate.
4. Press the ON/OFF button (7) on the compact tire inflator.
5. Stop inflating occasionally to check the air pressure on the manometer and to be sure not to overin-
flate your item.
6. Press the ON/OFF button (7) again when the item is inflated to turn off the compact tire inflator.
The tire inflator works even if the booster MPB-8800 is off (5).
TROUBLESHOOTING
IF...
My items are not recharging or the
compact tire inflator is not inflating.
I haven't used my booster MPB-8800 in
a while, and now the unit is completely
drained.
MAINTENANCE
Use common sense when caring for your MPB-8800. Be sure the connectors and jacks remain clean
and free of debris. Unplug the MPB-8800 after charging. Turn off (5) and store the MPB-8800 and its
accessories in the carrying case provided.
1 LED light
4 Manometer
(PSI/bar/KPA)
TRY THIS...
Recharge the booster MPB-8800.
Verify that your items are correctly connect-
ed
You may have accidentally put it away with
it powered on (5). Recharge it.
13
7 ON/OFF button
6 Connector
5 Plug cord