Setting Favourites - Saba SCB1910VX Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

Moving the channels in the channel list

• Press " " or " " buttons to select the channel that

will be moved.

• Press " " or " " buttons to select the "Move" item on

Channel List menu.

Following OSD will be displayed next to "OK" item

to indicate that enter a number by using the numeric

buttons on the remote control and press "OK" to

confirm.

Note: If you enter the same programme number of the channel

that you want to move, ".... channel services will be replaced.

Do you want to continue?" OSD will be displayed. Press OK

to confirm or select "No" to cancel.

Deleting the Channels in the Channel List

• Press " " or " " button to select the channel that

will be deleted.

• Press " " or " " button to select the "Delete'' item

on Channel List menu.

• Press the "OK" button to delete the highlighted

channel in the channel list. Then the message below

appears on the screen:

• Press " " or " " button to highlight the desired

option. If "OK" button is pressed while "Yes" is

highlighted, the highlighted channel is deleted.

Selecting "No" cancels the deletion.

Renaming Channels

To rename a specific channel, the channel must

be highlighted by pressing " " or " " button. Then

highlight the Edit Name item by pressing " " or " "

button as illustrated below. Press the "OK" button to

activate the rename feature.

Now pressing " " or " " button moves to the previous/

next character. Pressing " " or " " button toggles

the current character, i.e., 'b' character becomes 'a'

by " " and 'c' by " ". Pressing the numeric buttons

'0...9' replaces the highlighted character with the

characters printed above the button one by one as

the button is pressed.

Press the "MENU" button to cancel the editing or OK

button to save the new name.

Adding Locks to Channels

Channel locking provides a password-protected

access to channels selected by parents. In order to

lock a channel you should know the parental lock

password (default value is set to 0000 in the factory

and can only be changed from the Configuration

menu).

Select the channel to be locked by highlighting it and

select the Lock option by pressing " " or " " button.

When the "OK" button is pressed, a dialog OSD asking

for the password will be displayed.

Enter the password by using the numeric buttons on

the remote control. The lock icon "

displayed next to the selected channel. Repeat the

same operation to cancel the lock.