Krüger & Matz SOUL Mode D'emploi page 8

BLUETOOTH
Pairing
1. Press and hold the Multifunctional button (MF) until you hear a voice
prompt (in paring mode, red and blue indicator blink alternately).
2. Please keep the speaker and external device close to each other when pairing.
3. Enable the Bluetooth function on the external device and search for new
Bluetooth devices.
4. Select and connect with this device (KM SOUL).
5. After successful pairing, the speaker will issue a voice prompt. When
the speaker is paired with an external device, the blue indicator blinks
every 5 seconds.
Notes:
• If pairing is not completed within 10 minutes, the speaker will turn off. In
that case, repeat paring process to pair the speaker with external device.
• Every time the speaker is switched on, it will connect to last connected
device automatically. Please note, your device must be on with Bluetooth
function turned on.
Bluetooth operation
1. Please make sure your external device is paired with the speaker to
stream music wirelessly.
2. Press the Multifunctional button (MF) to pause and play music.
AUX
1. Use 3.5 mm AUX cable and connect one end of the cable into the
speaker's 3.5 mm input.
2. Connect the other end into the 3.5 mm input of the device you wish to
play music from.
3. Please make sure the speaker is turned on.
4. Start playing music from your device.
CHARGING
1. Connect the USB charging cord to the charging port of the speaker and
insert the other end into a port in a computer or other USB charging device.
8
Owner's manual