Publicité
10
INTERNAL PROGRAMS / INTERNE PROGRAMME / PROGRAMMES INTERNES / PROGRAMAS INTERNOS / PROGRAMY WEWNĘTRZNE /
PROGRAMMI INTERNI
EN
Press the MODE button repeatedly until one of the 13 internal programs PG00 - PG12 appears on the display.
PG00 PROGRAM COLOUR MACROS + STROBE
Using the UP and DOWN buttons, select the PG00 program. To change the colour, press ENTER and select one of the 7
available colours or blackout by using the UP and DOWN buttons.
Confirm with ENTER. The display now shows "FSxx". Now you can use the UP and DOWN buttons to add a strobe effect to the previously selected
colour. (FS00 = strobe effect disabled, FS01 = minimum strobe speed, FS99 = maximum strobe speed). Once the desired stroboscope effect has
been set, press ENTER to confirm the input.
PG01 - PG12 COLOUR CHANGE PROGRAMS + STROBE
Using the UP and DOWN buttons, select one of the 12 colour change programs PG01 - PG12. The individual colours can spread over the entire width
of the LED bar, or be displayed in the 3 LED sections of the LED bar. The colour change occurs abruptly, and the colours are blended into each other.
The speed of the programs is separately adjustable and a stroboscope effect can also be activated.
Adjusting the speed and the stroboscope: once you have selected one of the 12 programs, press ENTER to confirm. The display changes to "SPxx"
(Speed). Now you can adjust the speed as desired by using the UP and DOWN buttons (SP01 = slowest, SP99 = fastest speed).
In order to both confirm and activate the strobe effect, press ENTER again and the display will change to "FSxx". Now,
using the UP and DOWN buttons, you can set the stroboscope speed (FS00 = strobe disabled, FS01 = slowest and FS99 = fastest flash frequency).
Once the desired stroboscope effect has been set, press ENTER to confirm the input.
With the PG05 program, the colour can be adjusted in addition to the running speed and strobe effect. After setting the strobe effect as desired, and
confirming the input with ENTER, the display shows "C1-x". Now use the UP and DOWN buttons to select the desired colour (C1-1 to C1-7) and press
ENTER to confirm.
Program PG06 provides the ability to set both changing colours individually. After setting the strobe effect as desired, and confirming the input with
ENTER, the display shows "C1-x". Now use the UP and DOWN buttons to select the desired program colour (C1-1 to C1-7) and press ENTER to
confirm. In the same way, you can now select the program colour 2 (C2-1 to C2-7). Confirm the input with ENTER.
DE
Drücken Sie die MODE-Taste so oft, bis im Display eines der 13 internen Programme PG00 - PG12 angezeigt wird.
PG00 PROGRAMM FARBMAKROS + STROBOSKOP
Wählen Sie mit Hilfe der Tasten UP und DOWN das Programm PG00 aus. Um die Farbe zu ändern, drücken Sie ENTER und selektieren eine der 7
verfügbaren Farben oder Blackout mit Hilfe der UP und DOWN Tasten.
Bestätigen Sie mit ENTER. Im Display wird jetzt "FSxx" angezeigt. Nun können Sie mit Hilfe der UP und DOWN Tasten zur zuvor ausgewählten Farbe
einen Stroboskopeffekt hinzufügen. (FS00 = Stroboskop-Effekt deaktiviert, FS01 = minimale Stroboskopgeschwindigkeit, FS99 = maximale Stro-
boskopgeschwindigkeit). Sobald der gewünschte Effekt eingestellt ist, drücken Sie auf ENTER, um die Eingabe zu bestätigen.
16
Colour Macros
C--0
= Blackout
C--1
= Red
C--2
= Green
C--3
= Blue
Farbmakros
C--0
= Blackout
C--1
= Rot
C--2
= Grün
C--3
= Blau
C--4
= Cyan
C--5
= Yellow
C--6
= Magenta
C--7
= White
C--4
= Cyan
C--5
= Gelb
C--6
= Magenta
C--7
= Weiß
Publicité
