GEHA top secret 390 Notice D'utilisation page 8

3 Machine components
1 2 3 4 5 6
1 Door
2 Paper feeding opening
3 Feed opening for disks and CDs
4 Safety instructions
5 LEDs
Paper shredder is ready for operation.
Paper jam or motor overloaded
Cut material container full or door open
6 Rocker switch
: On
: Off, Reverse
4 Scope of delivery
• Paper shredder, ready for connection, in car-
ton packing
• 5 Bags for shredded material
• Special cutting block oil 50 ml (cross cut)
• Operating instructions
Acces so ries:
• Bag for shredded material
order No.: 1.442.995.000
• Special cutting block oil 250 ml
order No.: 1.235.997.403
8
5 Operation
Switching the paper shredder on
• Press rocker switch .

 R ocker switch locks in place.
 Green LED lights.
 Paper shredder is ready for opera-
tion (standby).
Feed paper
• Insert the paper to be destroyed.
See „Technical data" for sheet
capacity.
 The shredding pro cess is star-
ted by a pho to –cell in the paper
feeding opening.
 Paper is pulled into cutting
system and shredded.
 When the paper fee ding
opening is free again, the cut-
ting sy stem au to ma tical ly swit-
ches off af ter app rox. 3 sec. and
returns to standby.
Shredding CDs and disks (see "Prop-
er Use")
Swit ching paper shredder off
• Tap rocker switch .
 Switch returns to ze ro po si ti on.

Geha top secret 390
Feed CDs and disks
through the slot in the
safety element. This
protects you from splin-
ters.
1003