Reiner P5-S Mode D'emploi page 8

2. Printing material
For the best results, use material that is porous, clean, non-greasy,
dry and at the same temperature as the print head.
Before carrying out a large print job, perform a test print.
3. Storage
Ink is fast-drying. The time it takes the print nozzles
to dry up depends on the ambient temperature
and the humidity.
Where the device is not equipped with a nozzle cover, protect
the printing cartridge
3
when interrupting work.
To securely close the nozzles
keep the seal at the dust cover
Remove the printing cartridge
f
Guide the printing cartridge into the dust cover
f
Push the printing cartridge back until the latching wing
f
clicks.
Use the print head within four weeks after opening.
7
Fig. +
A B

2
against drying out with the dust cover
6
of the printing cartridge
3
free from dirt and dust.
2
out of the device.
6
2
,
3
.
4