Panasonic CW-XC64HU Manuel D'installation Et D'utilisation page 19

Abnormal Operation
Model: CW-C84GU
Problem
I The air conditioner is
unplugged.
I The fuse is blown/circuit
Air conditioner
breaker is tripped.
does not start
I Power failure.
I Airflow is restricted.
I The THERMOSTAT may
not be set high enough.
I The air filter is dirty.
Air conditioner
does not cool as it
should
I The room may have been
hot.
I Cold air is escaping.
I Cooling coils have iced up.
I Ice blocks the air flow and
Air conditioner
freezing up
stops the air conditioner
from cooling the room.
Possible Causes What To Do
• Make sure the air conditioner plug is inserted
completely into the outlet.
• Check the house fuse/circuit breaker box and
replace the fuse or reset the breaker.
• If power failure occurs, turn the mode control to Off.
When power is restored, wait 3 minutes to restart the
air conditioner to prevent tripping of the compressor
overload.
• Make sure there are no curtains, blinds, or furniture
blocking the front of the air conditioner.
• Turn the knob to a higher number. The highest
setting provides maximum cooling.
• Clean the filter at least every 2 weeks.
See the care and Maintenance section.
• When the air conditioner is first turned on, you need
to allow time for the room to cool down.
• Check for open furnace floor registers and cold air
returns.
• See Air Conditioner Freezing Up below.
• Set the mode control at Med Fan or High Cool with
thermostat at 1 or 2.
18