Installation And Start-Up; Opening And Closing The Unit; Configuring The Device - ADEUNIS ARF8276C Guide Utilisateur

Sigfox Smart Building MOTION - Guide utilisateur / User guide version V1.0.1

5. Installation and Start-up

5.1. Opening and closing the unit

5.2. Configuring the device

Insert a flat screwdriver into the opening on the top
of the casing and press. The casing opens in two and
the front panel comes off.
CAUTION: Press gently and straight so as not to
damage the casing
Front face
To configure the device:
1. Open the unit (paragraph 5.1)
2. Insert the micro-USB
3. Configure your device as described in paragraph 3.
To close the unit, insert the bottom of
the front panel first and clip the top of
the casing
2
1
FR
EN
Page 75 of 83