Table Des Matières; Safety Instructions - Max TA116A/21-13 Manuel D'utilisation Et D'entretien

OPERATING and MAINTENANCE MANUAL
INDEX
1. SAFETY INSTRUCTIONS ..................................................3
2. SPECIFICATIONS AND TECHNICAL DATA .................... 6
3. AIR SUPPLY AND CONNECTIONS .................................. 6
4. INSTRUCTIONS FOR OPERATION .................................. 7
5. MAINTENANCE.................................................................. 9
6. STORAGE ..........................................................................9
7. TROUBLE SHOOTING/REPAIRS......................................9
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING

1. SAFETY INSTRUCTIONS

WARNING
TO AVOID SEVERE PERSONAL INJURY OR PROPERTY
DAMAGE
BEFORE USING THE TOOL, READ CAREFULLY AND UN-
DERSTAND THE FOLLOWING "SAFETY INSTRUC-
TIONS". FAILURE TO FOLLOW WARNINGS COULD
RESULT IN DEATH OR SERIOUS INJURY.
ENGLISH
PRECAUTIONS ON USING THE TOOL
1. WEAR SAFETY GLASSES OR GOGGLES
Danger to the eyes always exists due to the possibility of
dust being blown up by the exhausted air or of a fastener fly-
ing up due to the improper handling of the tool. For these
reasons, safety glasses or goggles shall always be worn
when operating the tool.
The employer and/or user must ensure that proper eye pro-
tection is worn. Eye protection equipment must conform to
the requirements of the Council Directive 89/686/EEC of 21
DEC. 1989 (American National Standards Institute, ANSI
Z87.1) and provide both frontal and side protection.
The employer is responsible to enforce the use of eye pro-
tection equipment by the tool operator and all other person-
nel in the work area.
NOTE: Non-side shielded spectacles and face shields
alone do not provide adequate protection.
3