3G & Wifi Connection - Archos TITANIUM 40 Mode D'emploi

3G & WiFi connection
3G connection
With your 3G SIM card, you should be connected to the Internet without
any further setup. The ARCHOS will only have signal if you are in an area
covered by your 3G provider's 3G or EDGE network. When connected to
the 3G network, the 3G icon is displayed in the status bar.
Activating the mobile data
To be able to access Internet, the mobile data icon must be activated.
1. Touch and hold the time & battery icons
to reveal the status bar.
2. Pull the blue line down to display the
status dashboard.
3. Touch the status dashboard icon
4. Touch the mobile data icon
Tip:
When you encounter connection problem's, see the FAQs on www.
archos.com or contact your 3G network connection provider.
10
.
to activate it. =>