Trouble Shooting And Remedy; Service Address - Nilfisk Griff Mode D'emploi

9.6. Trouble Shooting and Remedy

Fault
No pressure with rinse nozzle
No foam with foam nozzle.
No sanitising spray with spray
nozzle.
In case of errors/troubles not mentioned above, please contact your local service technician for further assis-
tants, do not attempt to service the unit your self.

9.7. Service address

Please see the back cover of this manual
Cause
No water supply.
Rinsing nozzle not installed.
Foam nozzle not installed
Type of chemical product not suit-
able.
Chemical limiting nozzle is blocked.
Spray nozzle not installed.
Sanitiser limiting nozzle is blocked.
Remedy
Open water supply valve.
Place rinsing nozzle.
Contact your local service techni-
cian.
Place foam nozzle.
Change to correct type of chemi-
cal product.
Change metering tip.
Place spray nozzle.
Shange metering tip.
Contact your local service techni-
cian.
21