Manual Cleaning; Principle Of The Injector System, Satellite; Functional Principle Of Rinsing; Functional Principle Of Foaming - Nilfisk FOOD PEGASUS PZC-M1 Mode D'emploi

4 . Manual cleaning

4 .0 Principle of the injector
system, Satellite
The system consists of a manually
controlled change-over-block with
a built-in injector, dosing valve,
external non-return valve for deter-
gents and air.
The principle is that the operation
handle closes for the rinsing and
forces the water through the injec-
tor.
Air will be added when handle is
in either foam or foam sanitising
position.
14
4 .0 .1 Functional principle of
rinsing
During rinsing the operation handle
is positioning so the water passes
directly through the block and out
in the rinsing hose. In this posi-
tion the injector for products will
automatically be rinsed with clean
water. When the low-pressure gun
is open, the pump station automati-
cally starts after approx. 5 seconds
and thereby rinsing pressure is
achieved.
Nilfisk FOOD
4 .0 .2 Functional principle of
foaming
During foaming the operation
handle is positioning so the water
forced to pass through the injec-
tor in the block. When the low-
pressure gun is open the pump
station starts up automatically after
approx. 5 seconds. The water will
then be led through the injector,
which sucks up products into the
mixing chamber where it is mixed
with air and water to the required
solution.
4 .1 Nozzles and Handle
Position
Rinse
The hose is connected to the
right outlet. Push/pull the twin
nozzle in rinse position. Operation
handle is in rinsing position.
Foam
The hose is connected to the out-
let. Push/pull the twin nozzle in
foam position. Operation handle is
in foaming position.
Sanitizing
The hose is connected to the right
outlet. Push/pull the twin nozzle in
rinse position.Operation handle is
in foam sanitising position.