5. Icon showing the origin of the displayed images, press to switch from the outside station to the camera and
vice versa
6. Contrast, brightness and volume controls
7. Current storage location (SD card or internal memory), here the SD card.
8. Choice to capture/record if there is a missed call or when monitoring. The icon shows a camera if image
capture is selected. The icon shows a video camera if video recording has been selected. Warning: Videos will be
recorded only on your SD card.
9. Back to the home page
Using the basic videophone functions
• A call from the outside station triggers an audible alarm and switches on the monitor. You have up to 30 seconds
to answer the call. If you have not answered within 30 seconds, a missed call message is left for the user if the
function has been activated (see "missed call" chapter). When the visitor has been identifi ed, press the
button
to talk. The button only needs pressing once to communicate with the visitor.
• After 120 seconds of conversation the communication is terminated and the screen switches to the home page.
If the conversation ends before the 120 seconds have expired, press the
key to end the communication. The
screen switches to the home page.
• To display the image again, press the
key on the home screen. Then press the
key to start 120 seconds
of conversation.
• Control an electronic lock or a door opener by pressing the
key
• Control a portal automation by pressing the
key
EXTEL - CONTACT - 01/2018
GB7