Publicité
Les langues disponibles
Les langues disponibles
Modello - Modèle - Model
Modell
Fabbricante - Constructeur
Manufacturer - Hersteller
MAINTENANCE TECHNICIAN PROFILE
Creation, enabling and disabling of the maintenance accounts take place directly on the collection terminal.
Access to maintenance mode is exclusively reserved for Epta and its partners.
The main functions of the MAINTENANCE TECHNICIAN PROFILE are:
•
Software configuration
•
Upgrade
•
Version number
•
Display of the last pings with network and hardware
•
Change the volume
•
Report for order
•
Doors selection
•
Display the log and the events on the doors
•
Kiosk report: Kiosk log display
•
Enable/disable a door
•
Opening of all doors.
Contact the support service, if you need one of the items listed above.
WARNING!
The door lock is equipped with a magnetic stop; if the door is opened, opening is signalled with an alarm.
If the lock is broken, the master column will signal the door is "NOT ACTIVE".
14. CONTROLLER
The column is equipped with an electronic controller to maintain the internal temperature.
The controller is calibrated in the factory and must not be touched by the user.
If the average internal temperature is not satisfactory, contact the support service.
Pressing the controller keys you access the following items:
•
Software loaded (TN, BT, AMBIENT)
•
Controller name; EPTA _____
•
Counter serial no.
•
Data log file (if active)
•
4 temperatures detected by probes
•
Working parameters
•
Rete Wi-fi a cui è connesso (se presente)
•
Indirizzo IP
EPTABRIKS OUTDOOR
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
The controller normally displays the average temperature of
the column.
The other instructions on the display identify the components
active in that moment.
2 8 / 7 2
PAGE
UM000417
N° DOC
Publicité
