Maytag MDB-9 Guide D'utilisation Et D'entretien page 6

Loading
Lower Rack
A variety of items such as
dinner plates, mixing bowls,
pots and pans and baking
dishes can be loaded in this
rack.
Tall items such as bakeware
and large platters can be
placed on the left side.
With the Stack-
Rack™ (select
models) shelf
raised, thin items
like cookie sheets
or pizza pans
may be placed
along the left
side. With the shelf down, two levels of glasses and
cups can be loaded. Stack-Rack™ style varies by
model.
Positioning the Fold-
Away™ Tines (select
models) flat in the back,
left corner provides
convenient loading space
for large, bulky items like
pots and pans or mixing
bowls.
Convertible Tines (select
models) in the back, right
corner can be adjusted to
provide narrow spacing for
loading plates or wide spacing
for loading deep bowls, pots or
pans. Flip tines up for narrow
spacing or down for wider
spacing.
Utensil Baskets
Removable Standard Utensil Basket (select
models)
For best cleaning results, prevent
items from nesting together by
placing some items in the basket
with handles up and some with
handles down. Load knives
handles up and spoons and forks
handles down, through the slots
in the hinged covered section(s)
(when closed).
Be sure that thin, finely pointed items do not extend
through the basket. This could block the lower wash
arm.
Small, lightweight items like baby spoons and plastic
measuring spoons should be placed in the section(s)
with the hinged cover(s).
Split & Fit™ Utensil Basket
(select models)
Back
The split silverware basket can
be separated and placed in
several locations in the lower
rack. Load flatware and utensils
into both sections or just one,
depending on your load.
To split the basket, hold the
Back
basket
firmly along
the sides.
Unlock
baskets as
shown here.
Odds & Ends Basket
Use this supplemental
basket in the upper rack
for loading miscellaneous
items and utensils. This is
also a safe place to load
sharp knives and pointed
items.
5
(select models)
Cont.