Skil IF5940-00 Guide D'utilisation page 13

5. After inflation, loosen and remove the air chuck and the Presta valve adapter, then tighten
the locking nut of the Presta valve stem.
Fig. 7
Inflating and Deflating with the
High-Volume Hose
The high volume hose is meant to be used for
objects that hold large amounts of air, such as
air mattresses, rafts and swimming pool floats.
Inflating with the High-Volume Hose
1. Remove the high-volume hose from its
storage area.
2. Connect the high-volume hose to the high-
volume air output. Align and attach the slots
in the hose to the pins, then turn the hose
counter clockwise until it locks in place
(Fig.9).
3. Connect other end of the hose to the item to
be inflated. Connect the hose directly or use the adapter attached to the hose.
4. See the instructions in the section of "Use the Digital Pressure Gauge in the High-
Volume Mode" in this manual for using the dual function inflator to start inflation.
5. After inflation, turn the hose clockwise until the pins align with the slots, then loosen and
remove the high volume hose.
WARNING
Locking Nut
To prevent serious injury from explosion: Do not overinflate. Do not
leave unit unattended while inflating.
Fig. 8
Presta Valve
Adapter
Fig. 9
High
Volume
Hose
Pin
Air Chuck
Clamp
Air Chuck
Presta Valve
High Volume Air
Output
13