Working Space - Polar Bear BRC Série Mode D'emploi

WORKING SPACE

Indicated on below pictures, minimum recommended distance to be left clear for a correct unit function and to allow access to the unit for mainte-
nance.
INSTALL THE UNIT IN A POSITION WHICH IS INACCESSIBLE TO UNAUTHORISED PERSONNEL:
The heat exchanger fins are made from aluminium sheet which is only 0.1 mm thick and could cause cuts in the event of
forceful accidental contact.
N.B. the fan characteristic does not allow any ducting of the air flow.
ALL VERSIONS
(H) HORIZZONTAL INSTALLATION
(V) VERTICAL INSTALLATION
A
1.1xA
1.1xA
BRC / BRE / i-BRE / BDC / i-BDC EN
33