Publicité
Les langues disponibles
Les langues disponibles
FUNCTIONS
Function Select (F) Button
Pressing the Function button will allow selection of frequency channels,
as well as selection of the various unit functions. Each press
permits selection of the desired channel (1–14), FM mode on or off,
beep tone, scan, VOX and Dual Watch functions. Pressing the Func-
tion button in the FM mode will allow FM frequency and FM preset se-
lection. This button also activates the Key lock feature when pressed
and held for more than 2 seconds.
FM Frequency and Preset Memory Selection
The transceiver is capable of receiving radio signals in the FM band,
and is also equipped with nine preset FM memory locations. The
presets allow the user to choose the nine most-used FM stations
and store them for quick access.
To enter the FM mode, press the function repeatedly until the FM
icon blinks. Press the Up (
) button and the FM icon becomes
steady. The transceiver will receive the FM frequency displayed.
To select an FM frequency while in the FM mode, press the function
button. The FM radio frequency icon will start to blink. Press the Up
(
) or Down (
) buttons until desired frequency is reached. Once
the desired frequency is reached, press the PTT button once or
the Function ( F ) select button twice.
To exit the FM mode, press the Monitor (M) button and the trans-
ceiver returns to the FRS mode.To recall a preset FM frequency while
in the FM mode, press the Function ( F ) button repeatedly until MEM
display appears. Using the Up (
) or Down (
) buttons, select the
desired memory preset ( 1 thru 9 ).
To store an FM station press the function button until FM display
flashes. Press Up (
) or Down (
) buttons to select desired FM
station. Then press function (F) button until MEM display flashes.
-11-
Publicité
