Leveling The Unit; Leveling Legs - Vintec A17653101 Guide D'utilisation Et D'entretien

10 Installation
Installing the Wine
Cabinet
Your Vintec Wine Cabinet has been
designed for either free-standing or slot-in
installation. When slot-in, the unit requires
additional space:
Top 2 inches (50mm)
Back 1.18 inches (10mm)
Sides .39 inches (30mm)
In either case, the front grille must NOT be
obstructed.
1.18"
(30 mm)
2" (50 mm)
Wine Cabinet
.39"
(10 mm)
(10 mm)

Leveling the Unit

Position the unit on a flat, level surface
capable of supporting the entire weight of
the unit when full.

Leveling Legs

Adjustable legs at the front corners of
the appliance should be set so the unit is
firmly positioned on the floor and level from
side to side and front to back. The overall
height of your Vintec appliance may be
adjusted between the minimum, 6' (1850
mm), by turning the leveling leg in and the
maximum, 6' ¼" (1913 mm), by turning
the leveling leg out.
To adjust the leveling legs, place the
appliance on a solid surface and protect
the floor beneath the legs to avoid
scratching the floor. With the assistance of
another person, lean the appliance back
to access the front leveling legs. Raise or
lower the legs to the required dimension
by turning the legs. On a level surface
check the appliance for levelness and
adjust accordingly.
.39"