Vintec A17653101 Guide D'utilisation Et D'entretien page 17

Shelf Types
Display Shelf
• Shipped flat inside cabinet
• Angled on top two liner ribs for
bottle display
Fixed Shelf (Two Types)
• Full Width
– Sits below Display Shelf and
below telescopic shelves
– Fixed to liner rib with screws at
the rear
• ¾ Width
– Sits below all other shelves
– Fixed with rear-mounted shelf
restraint
Telescopic Shelves
• Full width
• Fully extend on rails
• Fixed to liner ribs with plastic
removable clips
Shelf Removal
The fixed shelves are not intended to be
removed from the product.
The telescopic shelves can be removed,
but maximum shelf capacity cannot
exceed 44 lbs.
To remove the telescoping shelves:
1. Open door to at least 145°.
2. Remove all wine bottles from the
shelf.
3. Fully extend shelf.
4. Using a Philips head screwdriver,
remove the 4 rail clip screws (2 per
rail).
5. Shelf and rails should slide out
together.
To reattach shelves, insert rail clip screws
into pre-existing holes on the rail supports.
Storage Features
NOTE
It is VERY IMPORTANT to use pre-
existing screw holes; attempting to
make new ones could jeopardize the
strength of the rails and risk failure.
17