Husqvarna AUTOMOWER 105 Manuel D'utilisation page 12

(RCD) when connecting the power supply to the
wall socket.
WARNING: Applicable to USA/
Canada. If power supply is installed
outdoors: Risk of Electric Shock. Install
only to a covered Class A GFCI
receptacle (RCD) that has an
enclosure that is weatherproof with the
attachment plug cap inserted or
removed.
WARNING: No parts of the power
supply must be changed or tampered
with. The low voltage cable must not
be shortened or extended.
Low-voltage cables of different lengths are
available as accessories.
WARNING: Do not under any
circumstances mount the power supply
at a height where there is a risk it can
be submerged in water (at minimum 30
cm / 12" from the ground). It is not
permitted to place the power supply on
the ground.
min 30 cm / 12"
WARNING: Use the plug to disconnect
the charging station, for instance
before cleaning the charging station or
repairing the loop wire.
WARNING: Place the low voltage
cable and adjust the cutting height so
that the blades on the blade disc can
never come in contact with the cable.
12 - Installation
WARNING: To reduce the risk of
damage to electrical components,
disconnect all connections to the
charging station (power supply,
boundary wire and guide wires) if there
is a risk of a thunderstorm.
For more instructions on how to do a proper
installation, refer to chapter
complete Operator's manual on Husqvarna's
website www.husqvarna.com.
3.2 Control panel
All commands and settings for the product are
made via the control panel. All functions are
accessed via a number of menus.
The control panel consists of a display and a
keypad. All information is shown on the display
and all input is done using the buttons.
Note: The display texts are shown in English in
the manual, but you will see the texts on the
product display in the chosen language.
3.3 Display Automower
When the STOP button has been pressed and
the hatch is opened, the operation window
appears showing the time, selected operating
mode, number of mowing hours, battery status
and timer setting.
• The clock shows the current time.
• Date shows the current day.
• The number of operating hours indicates the
number of hours since the day of
manufacture that the product has been in
operation. The time that the product has
spent mowing or searching for the charging
station is counted as operating time.
AUTO , MAN or HOME show which mode of
•
operation is selected.
• The battery status shows the remaining
battery charge.
Installation in the
®
105
1194 - 001 - 23.05.2019