Table des Matières
Publicité
3. Use the holes in the mounting plate as a template and use a pencil to mark the
location on the wall where you want to attach the display mount. (figure 2)
4. Follow the appropriate steps for the type of wall that you're using and attach the
mounting plate to the wall.
figure 2
Mounting plate
Attach a monitor to the display mount
To accommodate different monitor sizes, the ARMWALL comes with two sets of screws
that are different lengths and diameters.
To select the appropriate screws for the type of monitor that you're using, complete
the following:
• Determine the depth of the mounting holes on the monitor.
• Determine the diameter of the mounting holes on the monitor.
1. Line up the mounting holes on the display mount with the mounting holes on the
back of the monitor.
2. Place the washers over the mounting holes on the display mount.
3. Insert the M4x14 mm screws or the M5x14 mm screws through the washers, the
display mount, and into the back of the monitor.
Instruction manual
6
Publicité
Table des Matières
