Paper Shredder Geha Top Secret 410 - GEHA top secret 410 Notice D'utilisation

8 Technical data
Cutting type
Shred size (mm)
Sa fe ty ra ting German DIN 32757 – 1
Cutting ca pa ci ty (Sheet) DIN A4
Lo ading width
Cutting speed
Voltage
Power for the maximum number of sheets
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Dimensions W x D x H (mm)
Weight
Volume of shred. mat. container
Noise level (Idle running/ load)
EC Declaration of Conformity
The manufacturer HSM GmbH + Co. KG, Austrasse 1 - 9, D-88699 Frickingen hereby declares that the machine,
referred to here as
document shredder Geha top secret 410
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Machinery directive 2006 / 42 / EC
EMC directive 2004 / 108 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2006
• EN 61000-3-2:2006
• EN 61000-3-3:1995 + A1:2001 + A2:2005
• EN 55014-2:1997 + A1:2001
• EN 13849-1
• EN 60950-1:2006
Authorised represenatative for the compilation of technical documentation:
Rolf Gasteier, HSM GmbH + Co. KG
Frickingen, 01.03.2010
Rolf Gasteier - Technical Director
The machine type was tested for compliance with the requirements of the EU Machinery Directive by: the test and cer-
tifi cation board of the Technical Administation Committee, c/o Verwaltungs-Berufsgenossenschaft, Deelbögenkamp 4,
D-22297 Hamburg, Germany.
This test centre is responsible in accordance with Appendix XI of the EC Machinery Directive.
14
70 g/m
2
80 g/m
2
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-4-4:1995 + A1:2001 + A2:2001
• EN 61000-4-5:1995 + A1:2001
• EN 61000-4-6:1996 + A1:2001
• EN 61000-4-11:1994 + A1:2001
Cross cut
3.9 x 50
3
38 - 40
33 - 35
400 mm
110 mm/s
230 V, 50 Hz
2100 W
Continuous operation
-10 °C to +40 °C
max. 90 %, without condensation
max. 2,000 m
595 x 470 x 1277
87 kg
146 l
60 dB(A) / 75 dB(A)
Geha top secret 410
1003