H.Koenig BPO-505 Manuel D'utilisation page 6

 The frequency and duration when the lid is open.
 Contains in the fridge
Therefore length of the time may vary for the unit to reach the
desired temperature set by a user.
The refrigeration system of the cabinet is designed to operate with
the cabinet located on a flat surface. Avoid tilting the cabinet side.
If the cabinet must be tilted on an angle for handling or moving
purposes, allow it to sit in an upright position 20 to 30 minutes prior
to plugging it in and starting the cooling of the storage compartment.
HOW TO OPERATE PARTY FRIDGE
1. Insert power plug into wall outlet
2. Press power button on front (right of digital display) to turn on
Fridge
3. Press the thermostat button on front (left of digital display) to
adjust the desired temperature for the Fridge. The display will
flash during the adjustment. The thermostat ranges from 32 –
61 degrees F. During normal use, the display will show the
average temperature inside of fridge.
Suggested temperature control:
Beer and Soda: 32 degrees F, White Wine: 45 - 50 degrees F,
Red Wine: 55 – 61 Degrees F.
The following resolutions can increase the cooling
function of this product:
4) When you begin to use the unit for the first time allow the unit
to operate continuously for 12-18 hours.
5) Alternate the racks within the cooler in the amount of 6 hours
intervals to improve cooling.
6) Increase the amount of space between the items placed in the
cooler in order for the items to properly cool.(Do not overload)
Proper Party Fridge Care and Cleaning
Warning:
To avoid electric shock always unplug you party
fridge before cleaning and moving. Ignoring this
warning may result in injury.
Do not use harsh chemicals, abrasives, ammonia,
General:
chlorine bleach, concentrated detergents, solvents or
metal scouring pads. SOME of these chemicals may
dissolve, damage and/or discolor your party fridge.
1) Remove the contents of the appliance
2) Wipe the inside and outside with surfaces with
a damp cloth. The addition of vinegar to the
water is good for the prevention of mold and
fungus.
3) Take the lid apart as shown on the drawing
and clean it.
4) Clean the detachable bottom and the lid parts
with lukewarm water and detergent.
5) Wipe all parts thoroughly after the cleaning.
6) Turn the slits in the sealing ring and in the
hinge rubber strip downward when assembling
the lid.
IMPORTANT:
When the Party Fridge is not in use it must be completely dry
inside to avoid mold growth (if possible have the lid open).