Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
Be sure to follow the assembly in-
CAUTION
structions for the appropriate
chest/cabinet. Do not use power tools to as-
semble chest/cabinet. Tighten bolts with hand
wrenches.
Tools Required (Not Included)
Phillips
Safety
screwdriver
goggles
Hardware Included
NOTE: Items not show in actual size.
Hardware
Item
AA
BB
CC
DD
EE
Item
Swivel caster with brake
Cold Storage Bracket
NOTE: Begin product assembly close to the final
intended location of your chest/cabinet. This product
is heavy and may be difficult to move after assembly.
10 mm
Wrench
Description
Quantity
Bolt M6 X 15L
Washer M8
Bolt M8 x 15L
Screw M4 x 10L
Screw M6 x 15L
Description
Quantity
Side handle
Rigid caster
Bracket
Bumper
Attach the side handle to the rolling cabinet using
four bolts (AA). The side handle can be attached to
either side of the rolling cabinet.
NOTE: The holes in the cabinet are tapped and do
not require nuts.
13 mm
Wrench
4
16
CAUTION
16
Do not overtighten the screws.
1. Ensure all cabinet drawers are securely locked into
20
place using the key lock on the rolling cabinet.
2. Lay the rolling cabinet on its back. Use the packag-
ing material to protect the finish.
8
3. Mount the two swivel casters with brake to the
rolling cabinet using four bolts (CC) and washers
(BB) per caster. The swivel casters with brake
should be installed on the end of the cabinet with
the side handle.
1
4. Mount the two rigid casters to the opposite end
of the rolling cabinet using four bolts (CC) and
washers (BB) per caster.
5. Tighten all bolts securely with a wrench.
2
6. Return the rolling cabinet to its upright position.
2
2
BB
CC
4
4
4
Attaching the Side Handle
Installing the Casters
Two people may be required to
complete installation.
AA
Publicité
