O'Barber TO50 Guide De L'utilisateur page 26

EN
4 SERVICING
4.1 ROUTINE SERVICING
◼ After using the clippers each time, clean the blades with the brush supplied (Fig. 1-I).
◼ If necessary, clean the body of the clippers with a cloth slightly dampened with water
or mild liquid soap. Never use abrasive products or solvents.
◼ Clean the blades with an antibacterial spray. We recommend STERIL CLEANER 920
disinfectant, lubricant and cooling products.
◼ Lubricate the cutters at least once a day (see § 3.4).
4.2 CLEANING THE BLADES
In the case of regular use, clean the blades at least once a day.
◼ Remove the blades as described in § 3.4.
◼ Clean the inside of the blades with the brush supplied (Fig. 6).
◼ With your thumb, press on the 2 lugs (arrows Fig. 6) to move the fixed/mobile blades.
Eliminate all cutting debris and residues stuck between the blades.
◼ Lubricate the cutters and put the blades back on the clippers as described in § 3.4.
26