Soehnle TORINO Mode D'emploi page 8

any way. Have repairs to the
EN
device or the power supply unit
performed only by an autho­
rized repair shop or service
centre.
• Place the device only on a
solid, level, and moisture­resis­
tant surface.
• Do not cover the device ­ parti­
cularly the ventilation ope­
nings.
• It cannot be completely exclu­
ded that some varnishes, plas­
tics, or furniture care products
may deteriorate and soften the
material of the non­slip feet.
Therefore please place a non­
slip pad underneath the device
if required.
• Do not place the device directly
underneath a shelf or a wall
unit; the water vapour could
damage such.
• Aromas containing oil (e.g.
eucalyptus oil) must not be
used as these may damage the
device. Use only water­soluble
aromas.
• Do not transport the device
with a filled water tank.
• Do not operate the device if it
contains very little or no liquid.
6
A. Start-up Operation
Fill the device only while the
power supply unit is disconnec­
ted!
1. Remove the upper part.
2. Fill with distilled water up to
the maximum water level indi­
cator (100 ml).
3. Add 1 to 2 drops SOEHNLE
fragrance oil.
4. Reattach upper part correctly.
5. Connect power supply unit.
6. Place on a level surface.
7. Switch on. The switch is loca­
ted in one of the feet. Place
hand on the device and press
in the direction of the switch.