Publicité
Les langues disponibles
Les langues disponibles
This user manual should be read carefully as it contains important notes on the safety, use and
maintenance of your device.
Keep it in a safe place and transmit it if the device changes ownership
1. TECHNICAL DATA
Material
Lighting modes
T ° Color
Angle / Zone Detection
Guarantee
Loading time
2. INSTALLATION
Notice :
1. This is a solar light, install it in a place where it will be able to get enough light to function properly.
2. Note that the lighting time depends on the time of exposure to light and brightness (clouds, rain, sun ...).
3. Fully charge the device before first use.
4. If the LED lights start blinking repeatedly, this indicates that the unit is weak and needs to be recharged.
5. When the sun is limited, the product takes longer to recharge completely.
Distribué par / D Distribuito da / istributed by NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers
Product
Color
Lumens
IP
1.Place the 2 expansion plugs in the holes.
2.Place the first screw in the expansion anchor.
3.Press the switch on the back of the lamp and select the
desired lighting mode.
SO14
BLACK
Aluminum
2 different lighting modes
4000K
460Lm
2-4 meters
IP65
2 years
Around 6 hours
EN
Publicité
