Use AND OpeRATION
X-TeNsION
is designed and custom made for the customer to protect
against the sun. If there is a power failure, If there is a power
failure, X-TEnSIOn (manual or electric) must be closed in the
event of wind above level 5 on the beaufort scale, as per data
sheet 1.
OpeRATINg CONTROLs
The awning is equipped with one of the following manoeuvre
systems:
1) Wall-mounted control plate for single canvas
Operated by pulling the rope as on sailboats.
The rope is secured using a jam cleat.
2) Wall-mounted control plate for two canvases
Operated by pulling the rope as on sailboats.
The rope is secured using a jam cleat.
3) pole-mounted control plate for single canvas
Operated by pulling the rope as on sailboats.
The rope is secured using a jam cleat.
4) pole-mounted control plate for two canvases
Operated by pulling the rope as on sailboats.
The rope is secured using a jam cleat.
5) electric drive
Remote control operated.
6) emergency control
In the event of a power failure, use the winding handle.
18 of 70
1
4
VELOMBRA SRL - uSER MAnuAL - X-TEnSIOn
2
5
THE AWNING HAS BEEN DESIGNED TO BE OPENED/
3
6
ATTeNTION:
CLOSED BY A SINGLE PERSON
Rev. 3 - 06.2012