hymer ALPE 4006812 Instructions De Montage Et D'utilisation page 16

Safety instructions
EN
Setup:
Be aware of the risk of collision (with pedestrians, vehicles or doors) when placing the product in position.
In the work area, lock doors (with the exception of emergency exits) and windows if possible.
Use the product at the correct
inclination angle.
Only set up the product on a level,
horizontal ground.
Only set up the product
on a solid ground.
Any risks posed by electrical equipment
in the working area must be identified.
This equipment may include exposed
high-voltage wires and other exposed
electrical equipment.
Before climbing the product, ensure
that the safety bar is fully engaged.
Only use with cross member fitted.
16 16
Do not set up the product
on an uneven ground.
Do not use the product
on a dirty ground.
Ensure that the product is securely
locked prior to use.
Fasten the product above or below
to secure it.
Products for accessing high areas
should be pushed out at least 1m
above the leaning point and,
if necessary, fastened.
Do not lean the product
against unsuitable surfaces.
2017-02 | 0095791 | 4006812