Exploring The Tablet - LENCO TAB-704 Manuel De L'utilisateur

Exploring the tablet

Volume + button: Press this button to increase the volume.
Volume - button: Press this button to lower the volume.
Micro SD slot: This is to insert an SD card.
DC in 5V socket: This is to connect the AC adaptor to charge the internal battery.
Reset button: Press this button if the tablet does not respond. Use a thin object like a
paperclip to push the reset button.
USB socket: This is to insert the USB cable so you can establish a connection
between the tablet and a PC.
Earphone socket: This is to connect a 3,5mm ear- or headphone.
ON/OFF button: Press and hold this button for 5 seconds to turn the tablet on, or off.
To put the tablet in standby mode, press and hold this button briefly. If the tablet is in
the standby mode, press this button briefly to switch it on.
7