Bosch PFS 65 Notice Originale page 20

20 | English
Technical Data
Fine-spray System
Article number
Rated power input
Spraying capacity
Atomising output
Required time for 5 m
paint application
Container capacity for
spray material
Length of air hose
Weight according to
EPTA-Procedure
01/2003
Protection class
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60335 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, Dept. PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
19.12.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
1 609 929 R18 | (31.1.08)
PFS 65
3 603 B06 1..
W
g/min
W
2
min
ml
m
kg
Dr. Eckerhard Strötgen
Head of Product
Certification
Assembly
Before any work on the machine itself, pull
the mains plug.
Connecting the Air hose
280
(see figures A1
130
– Open the holding clamp 16 and unreel the air
65
hose 13.
10
– Remove the protective caps from both ends
of the air hose.
600
Connecting to the spray gun:
– Firmly insert an SDS connector 14 of the air
1.8
hose in alignment with the arrow mark into
the hose port of the spray gun 6.
2.8
– Turn the SDS connector until the lock can be
heard to latch.
/ II
Connecting the base unit:
– Firmly insert the second SDS connector of
the air hose in alignment with the arrow mark
into the port of the base unit 19.
– Turn the SDS connector until the lock can be
heard to latch.
Note: After use, reattach the protective hose
caps to the hose ends.
Fastening the Carrying Strap
(see figure B)
In order to reach all surfaces to be sprayed and
maintain flexibility, you can sling on the base
unit with the carrying strap 20.
– Attach one strap end to each eyelet 17.
A2)
–
Bosch Power Tools