Zibro Aida Manuel D'utilisation page 105

Picture F11: cleaning pellet
hopper and auger
Only check the fire door seal when the stove has cooled down completely!
F.3.8 cLeAnIng PeLLeT hOPPeR AnD AUgeR
Check the pellet hopper and auger once per month on saw dust or other debris.
Make sure the pellet hopper is empty. See pict. F11. Clean the pellet hopper and
auger with a vacuum cleaner.
Make sure the power supply to the stove is unplugged completely.
g. TechnIcAL seRVIce, ORIgInAL sPARe PARTs
Before leaving the factory, each stove has been carefully tested and commissioned.
Any repairs or commissioning that may become necessary during or after installa-
tion must be carried out by heating engineers authorized by Zibro. Original factory
spare parts can be obtained only and exclusively from our Technical Servicing Cent-
ers and authorized points of sale.
When contacting your dealer, the Technical Service Centre or the authorized heat-
ing engineer, first make sure to be able to specify the model and serial number at
their first request.
Only use by Zibro agreed spare parts. Using non Zibro spare parts will lead to nul-
lification of the warranty.
4 1
105