PNI Escort HP 8001L Manuel Utilisateur page 4

FRONT PANEL DESCRIPTION:
A. 2 pin connector for earphone and microphone
1. 6-pin microphone connector
Increase channel number
2.
3. Decrease channel number
Knob for squelch adjustment – the squelch makes your radio quieter by removing the background
4.
noise. Rotate the knob clockwise to reduce the noise or counterclockwise if you want to hear even the
weakest signals.
ASQ knob – to increase the ASQ level rotate the knob clockwise. In this case it reduces the background
5.
noise but also the signal level received.
Tip: turn on the radio with the ASQ knob turned completely to the left.
6. Knob for turning on/off the radio and for volume control – Turn clockwise to turn the radio on and to
increase the volume. If no signal is received, we suggest you to adjust the squelch (by rotating the SQ
knob counterclockwise) and then adjust the volume to a comfortable level. When switched on from the
volume knob, the radio will store the last channel used.
AM/FM mode select button
7.
Note: The radio works in AM mode only by changing the standard (details on page 6)
8. Multifunctional switch:
"19": emergency channel selection
•
• "CH": channel selection 1~40 (according to the selected standard)
• "L": key lock
TX/ASQ LED indicator - During the transmission the LED will be red, and when the ASQ function is
9.
activated, the LED will be green.
10. Signal level indicator – 4-bar indicator to monitor the power of the received/emitted signals
11. LED display – displays the channel number
REAR PANEL DESCRIPTION:
1. Antenna jack
2. 12VDC power cable
External speaker jack
3.
ANT
1
4
EXT
13.8VDC
2 3