Prepare The Remote Control; Replace The Remote Control Battery - Akai TB342-47 Manuel D'utilisation

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.
Even if the Remote Control is operated within the effective range (6m), remote control
•
operation may be impossible if there are any obstacles between the unit and the remote
control.
If the Remote Control is operated near other products which generate infrared rays, or if other
•
remote control devices using infra-red rays are used near the unit, it may operate incorrectly.
Conversely, the other products may operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove
the protective tab to activate the remote control battery.

Replace the Remote Control Battery

1 Pull out the battery tray and remove the
old battery.
2 Place a new CR2025 battery into the
battery tray with correct polarity (+/-) as
indicated.
3 Insert the battery tray back into the slot.
Precautions Concerning Batteries
When the Remote Control is not to be used for a long time (more than a month), remove the
1
battery from the Remote Control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery compartment and replace the
2
batteries with new ones.
Do not use any batteries other than those specified.
3
Do not heat or disassemble batteries.
4
Never throw them in fire or water.
Do not carry or store batteries with other metallic objects. Doing so could cause batteries to
5
short circuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable type.
6
25
GB