Akai TB342-47 Manuel D'utilisation page 24

Placement and Mounting
Remove the screws from the main unit.
Drill 2 parallel holes (Ø 3-8 mm each according
to wall type) in the wall. The distance between
the holes should be 979 mm.
Leave a 5 mm gap between the wall and the screw's head. Lift the unit with the attached wall
brackets over the heads of the screws and slot into place.
9 7 9 m
m
Attach the wall brackets to the main unit with
the screws removed from the main unit.
Wall bracket
Firmly fix 1 dowel into each hole in the wall
if necessary.
Dowel
22
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
5 mm
25-30 mm