Installation steps (recirculation mode)
1. If your home is not equipped with an air outlet for extracting exhaust air to the
outside, the exhaust hose is not required. The further installation is similar to
the I
NSTALLATION STEPS
2. You can use carbon filters for odour absorption in recirculation mode only. For
installing carbon filters, remove the grease filter. Press the lock and pull the
grease filter downwards.
3. Plug the carbon filter into the appliance and turn in clockwise direction.
WARNING! Unplug the appliance before installing the carbon filter.
For recirculating mode only!
WARNING! Install the carbon filters safely and properly; otherwise
the carbon filters can loosen and cause hazardous situations.
NOTICE! The suction capacity is decreased by installed carbon filters.
(
EXTRACTION MODE
You can order the carbon filters at
www.pkm-online.de
31
).